MinimOSD heat mod

Posted: 11/15/2013 in Howto
Tags: , , ,

In my last post I talked about the RcTimer MinimOSD. I explained what the MinimOSD is, how it works and why you should do some simple modifications to the MinimOSD.

In this post I will write a simple (and short) solution to make sure your MinimOSD won’t overheat anymore. In fact the 5V mod should be sufficient, but since the MinimOSD plays a really critical role in your FPV setup I wanted to make sure it would last for a long time and be very reliable. If the MinimOSD fails due to overheating the Maxim OSD chip, your video feed will be gone immediately and without a warning! Crash guaranteed! So just to be sure, I do everything possible to get rid of the heat from the Maxim OSD chip! Better safe then sorry…

Let’s start!

First find some heatsink (do not confuse with heatshrink…:) ) to cool the maxim chip on the MinimOSD. You can find heatsinks in a lot of hardware what needs some cooling. You definitely will find a heatsink on GPU’s from a (old) pc. If you can’t find a heatsink somewhere or just are a bit lazy (like me), buy some on Ebay. I’ve bought this one: 5pcs 11x11x5mm adhesive Aluminum Heat Sink For Memory Chip IC. Only $ 1.15 including world wide shipping. You can buy them in a lot of different dimensions. This is how they look like.

Heatsink for MinimOSD

I’ve bought a bit bigger heatsinks on purpose so I also can use them for some voltage regulators and other stuff. Please be aware that the Aluminium is conductive and that you should not let the aluminium touch any pins on circuit boards. The adhesive 3m side isn’t conductive so it isn’t a problem to let the adhesive side touch any components.

Heatsink for MinimOSD 2

I decided to cut the heatsink with my dremel tool so it does fit nicely on the maxim chip only. It will provide more then enough cooling to keep the maxim chip from overheating.  You could also saw it. Try to make sure that the adhesive side doesn’t get all the material on it from using your saw or dremel, since it won’t stick then anymore. For example, you could pack the heatsink in some scotch tape. Now gently cut the heatsink to the right size. If you don’t want to cut it that’s also no problem, just make sure you don’t hit any components.

Here’s my result:

Heatsink for MinimOSD 3Heatsink for MinimOSD 4

The final thing you should do is wrap the whole MinimOSD in some heatshrink. Cut some slots for the heatsink, so that the “legs” of the heatsink make contact with the air so the heatsink can dissipate the heat. That’s all. Your MinimOSD should stop getting hot and last longer! The heat will be dissipated nicely by the aluminium heatsink! Enjoy your flights!

Advertisements
Comments
  1. […] alleen maar doorgeeft zolang deze werkt). Zie hier ook mijn kleine tutorial over de heatsink mod: MinimOSD heat mod | Hoogvlieger __________________ Vliegplekken&clubs in Nederland zien? Of zin om je eigen Vliegplek of […]

  2. […] Ik geloof dat ik hem ook al eens ergens had neergezet op het forum, maar voor de geinteresseerde: MinimOSD heat mod | Hoogvlieger RTF quads uit de VS verkoopt voor 11 USD minimosd's waar al diverse weerstandjes etc ingebouwd […]

  3. jaipeauu says:

    Using 3M foam tape to stick the heatsink on the IC will not conduct heat very well?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s